Cold Trap Bath
- Digital temp controller type (convenient to check the teperature status)
- 3 Glass Trap installation
- Upside opended Glass Trap
- Seamless structure bath to prevent leakage of anti-freeze
- Easy internal observation with Transparent Cover
*Important Notice
Ethylene glycol or anti-freezer is recommended. But they should be sloopy and runny enough, otherwise it will affect the performance of cooling. Heat transfer fluid is also recommended in case of cryogenic products.
Specification
| Model | SH-WB-5GDR |
| Order Number | SH-WB-5GDR(-80) |
| Temp Controller | Microprocessor Digital controller |
Temp Control Range | Ambient -100℃ ~ -60℃ (-180℉ ~ -76℉ ) (Low limit -80℃) |
Dimension Internal (Φ×H) | 180Φ×210Hmm 7.09Φx8.27'' |
Dimension External (WxD×H) | 505x620x750mm 19.88x24.41x29.52'' |
| Weight | 75 kg |
| Material Internal | Stainless Steel |
| Material External | Steel Plate With Powder Heating Coated |
| Trap | Openable Glass Trap x3ea |
| Noise (dB) | 50 |
| Power | 120V ,60Hz, 1Φ |
| Cat. No. | WB5GDR-80120-60 |
Power | 230V,60Hz, 1Φ |
| Cat. No. | WB5GDR-80230-60 |
• Safety Device
-Automatic reset function incoming power cut
-Electric leakage circuit breaker
Cold Trap Bath
-Feature
In vacuum applications, a cold trap is a device that condenses all vapors(except the permanent gases) into a liquid or solid. The main purpose is to prevent vapors being produced by an experiment from entering then vacuum pump where thy would condense and contaminate it. Cold traps can also cool surfaces or baffles to prevent oil vapors flowing from a pump into a chamber.
In such a case, a baffle or section of pipe containing a number of cooled vanes, will be attached to the inlet of an existing pumping system.
- Digital controller
- Openable 3 glass trap
- Rust-free stainless coil
Uniformity sheet