1200℃ tube furnace (50mm diameter tube and 300mm hot zone)
- General tube furnace with hinged door
- Double housing and low surface temperature (29~30℃ at 800℃)
- Recommended ideal running temperature is below 1000℃
- Great durability thanks to Kanthal heating element
- Suitable for gas exchange experiment
- Light weight and prompt heat up thanks to ceramic insulation
- Convenient design for sample loading
- Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
- Built in over temp protector
- SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
- Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
- Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Specification
Model |
SH-FU-50STG |
Max temperature |
1200℃ |
Continuous running temperature |
1000℃ |
Tube diameter |
50mm |
Controller |
Programmable controller |
Sensor |
K type |
Heater |
2kW |
Hot zone | 300mm |
Heating element |
Kantal with ceramic molding |
Insulation |
Ceramic |
External size | I500x360x520mm |
Weight | 27kg |
Power supply |
110V, 50/60Hz, 1p, 18A 220V, 50/60Hz, 1p, 9A |
1200℃ tube furnace gas flow package
- 1 x gas flow meter
- 1 x gas sealing mask
- stainless steel pipes and connectors
- Multi gas inlet option available
Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.
● Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
● Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
And we do OEM and custom products as well.