Product Details

Back

SH-FU-31MGVQ

Product Info
Discounted Amount Total Discounted Amount KRW
(Mobile Purchase Discount KRW )
Reward Points
Shipping Method Parcel Service
Shipping Cost International Shipping Fee
Description
Shipping
Product List
Product Info Product Remove










SH-FU-1.5MGV
Model SH-FU-31MGVQ
Max Temp 1200℃ (2192℉)
Temp Controller Programmable Controller(SP590)
Heater Capa 6100 W
Capa 31L
Dimension Internal
(W×D×H)
(Quartz Chamber 5T) 305x305x305mm
 12.00x12.00x12.00''
Dimension External
(W×D×H)
940x710x820mm
37.01x27.95x32.28''
Material External Steel Plate with powder heating coated
Heater Element KANTHAL A-1 (Ceramic heating)
Insulation Ceramic Board & Wool (Ceramic fiber)
Electrical Requirements
120V, 50/60Hz, 1Φ
N/A
Cat. No.
Electrical Requirements
230V, 50/60Hz, 1Φ
26.5 A
Cat. No. FU31MGV230
Electrical Requirements
230V, 50/60Hz, 3Φ
15.1 A
Cat. No. FU31MGV230-3
Electrical Requirements
380V, 50/60Hz, 3Φ
9.1 A
Cat. No. FU31MGV380-3
    • Option
  • -Hybrid recorder
  • -MFC, BPR
    • Safety Device
  • -Automatic reset function incoming power cut
  • -Buzzer on when set time arrived
  • -Over temperature alarm










Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.


 Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
 Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
 Material technology providers who develop polymer composites and graphene materials.
 Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
 Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
 Material innovation companies who do sintering in vacuum or in inert gases.
 Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
 Analytical research labs who perform various material testing with thermal treatment.
 Medical implants manufacturers who anneal alloy powders.
 Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
 Applied science engineers who process solid oxide fuel cells (SOFC).
 Environmental and chemical researchers who need combustion of materials.
 Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
 Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
 Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
 Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
 Engineering companies who do curing and sintering solutions in porous ceramic tubes.
 Civil engineers who need soil combustion.
 University labs who anneal Si wafer in vacuum condition.
 Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
 Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
 Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
 Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.

 

SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on.

And we do OEM and custom products as well.

 

 

 

 


Product Details
Product Name SH-FU-31MGVQ
Model SH-FU-31MGVQ

Payment

Shipping

  • Shipping Method : Parcel Service
  • Shipping Area : A Region.
  • Shipping Cost : International Shipping Fee
  • Shipping Time : 3 - 7 days
  • About Shipping :

Returns/Exchanges

Product Inquiry

Product Reviews

Write a Review See All

There are no posts to show

상품 Q&A

Write

There are no posts to show

Seller Info


WORLD SHIPPING

PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :

GO
Close
Top